The Polyester Styrene Free two part injection resin is suitable for use in solid concrete, solid brickwork and natural stone as well as hollow materials using a suitable sleeve. It can be used for installing threaded studs, rebar or internal threaded sockets. The resin is applied with a standard skeleton gun.
Benefits:
• Expansion free
• High load capacity
• Can be closely spaced and used near edges
Application:
• Drill correct diameter hole to the correct depth
• Clean the hole with a brush and blow tool
• Attach nozzle to cartridge. Extrude first part to waste until an even colour is achieved. Fill hole 1/3 to 1/2 full starting from the bottom of the hole.
• Insert stud by hand using a downward twisting motion
• Allow resin to cure.
• Attach fixture.
• Tighten to recommended torque.